H3C S7500E Series Command Manual page 254

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
protocol: Routing protocol. It can be BGP, DIRECT, ISIS, OSPF, RIP, or STATIC.
inactive: Displays information about only inactive routes. With this argument absent,
the command displays information about both active and inactive routes.
verbose: Displays detailed routing table information. With this argument absent, the
command displays brief routing table information.
Description
Use the display ip routing-table protocol command to display routing information of
a specified routing protocol.
Examples
# Display brief information about direct routes.
<Sysname> display ip routing-table protocol direct
Public Routing Table : Direct
Summary Count : 5
Direct Routing table Status : < Active>
Summary Count :
Destination/Mask
2.2.2.0/24
2.2.2.2/32
127.0.0.0/8
127.0.0.1/32
192.168.80.10/32
Direct Routing table Status : < Inactive>
Summary Count : 0
# Display summary information about static routes.
<Sysname> display ip routing-table protocol static
Public Routing Table : Static
Summary Count : 1
Static Routing table Status : < Active>
Summary Count :
5
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
0
1-14
Chapter 1 Routing Overview Commands
NextHop Interface
2.2.2.1 Vlan2
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0