H3C S7500E Series Command Manual page 246

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Tunnel ID: 0x0
Destination: 192.168.0.0/24
Protocol: Direct
Preference: 0
NextHop: 192.168.0.72
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
Destination: 192.168.0.72/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
Displayed first are statistics for the whole routing table, followed by detailed description
of each route (in sequence).
Table 1-5 display ip routing-table verbose command output description
Field
Destination
Protocol
Process ID
Preference
Cost
NextHop
Interface
RelyNextHop
Neighbour
Tunnel ID
Label
State: Active NoAdv
Tag: 0
State: Active Adv
Tag: 0
State: Active NoAdv
Tag: 0
Destination address/mask length
Protocol that presents the route
Process ID
Priority of the route
Cost of the route
Address of the next hop on the route
Outbound interface for packets to be forwarded along the route
The next hop address obtained through routing stack.
Neighboring address determined by Routing Protocol
Tunnel ID
Label
Chapter 1 Routing Overview Commands
Label: NULL
Age: 3d23h11m51s
Process ID: 0
Cost: 0
Interface: Vlan-interface1
Neighbor : 0.0.0.0
Label: NULL
Age: 3d23h08m38s
Process ID: 0
Cost: 0
Interface: InLoopBack0
Neighbor : 0.0.0.0
Label: NULL
Age: 3d23h08m40s
Description
1-6