Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Table 1-1 Description on the fields of the display ip relay-route command
Total Number of Relay-route
Dest/Mask
Related instance id(s)
1.1.2 display ip relay-tunnel
Syntax
display ip relay-tunnel
View
Any view
Parameters
None
Description
Use the display ip relay-tunnel command to display recursive tunnel information.
Examples
# Display recursive tunnel information.
<Sysname> display ip relay-tunnel
Total Number of Relay-tunnel is: 1.
Dest/Mask: 40.40.40.40/255.255.255.255
Related instance id(s): 1(1) 2(1) 3(1) 4(1)
Table 1-2 display ip relay-tunnel command output description
Total Number of Relay-tunnel
Dest/Mask
Related instance id(s)
Field
Total number of recursive routes
Destination address/mask of the recursive route
The number in the parentheses after each
instance ID indicates the number of routes that
have used the recursive route in the routing table
corresponding to the instance ID.
Field
Total number of recursive tunnels
Destination address/mask of the recursive tunnel
The number in the parentheses after each
instance ID indicates the number of routes that
have used the recursive tunnel in the routing table
corresponding to the instance ID.
1-2
Chapter 1 Routing Overview Commands
Description
Description