H3C S7500E Series Command Manual page 304

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
By default, all interfaces are allowed to send routing updates.
Examples
# Configure all VLAN interfaces to work in the silent state, and activate VLAN-interface
10.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] silent-interface all
[Sysname-rip-100] undo silent-interface vlan-interface 10
[Sysname-rip-100] network 131.108.0.0
2.1.29 summary
Syntax
summary
undo summary
View
RIP view
Parameters
None
Description
Use the summary command to enable automatic RIPv2 summarization. Natural
masks are used to advertise summary routes so as to reduce the size of routing tables.
Use the undo summary command to disable automatic RIPv2 summarization so that
all subnet routes can be broadcast.
By default, automatic RIPv2 summarization is enabled.
Enabling automatic RIPv2 summarization can reduce the size of the routing table to
enhance the scalability and efficiency of large networks.
Related commands: rip version.
Examples
# Enable RIPv2 automatic summarization.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] summary
Chapter 2 RIP Configuration Commands
2-26