H3C S7500E Series Command Manual page 170

Command Manual – Link Aggregation
H3C S7500E Series Ethernet Switches
Description
Use the display link-aggregation interface command to display detailed information
about link aggregation for the specified port or ports.
You may find that information about the remote system is replaced by 0 and no
statistics about LACPDUs are provided for manual link aggregation groups. This is
normal because this type of aggregation group has no knowledge of its partner and
does not use LACP PDUs for maintaining link aggregation.
Examples
# Display detailed information about link aggregation for port Ethernet 2/0/1 in a manual
aggregation group.
<Sysname> display link-aggregation interface ethernet 2/0/1
Flags:
Ethernet2/0/1:
Selected AggID: 1
Local:
Port-Priority: 32768, Oper key: 1, Flag: {}
Remote:
System ID: 0x0, 0000-0000-0000
Port Number: 0, Port-Priority: 0, Oper-key: 0, Flag: {}
# Display detailed information about link aggregation for port Ethernet 2/0/2 in a static
aggregation group.
<Sysname> display link-aggregation interface ethernet 2/0/2
Flags:
Ethernet2/0/2:
Selected AggID: 20
Local:
Port-Priority: 32768, Oper key: 2, Flag: {ACDEF}
Remote:
System ID: 0x8000, 000e-84a6-fb00
Port Number: 2, Port-Priority: 32768 , Oper-key: 10, Flag: {ACDEF}
Received LACP Packets: 8 packet(s), Illegal: 0 packet(s)
Sent LACP Packets: 9 packet(s)
A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Chapter 1 Link Aggregation Configuration Commands
1-2