Reset Counters Interface - H3C S7500E Series Command Manual

Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
aggregation agg-id: Number of the specified port aggregation group. The specified
port aggregation group must already exist. You can use the display link-aggregation
summary command to display brief information of all existing port aggregation groups.
Description
Use the port-group manual command to create a manual port group and enter
manual port group view.
Use the port-group aggregation command to enter aggregation group view.
Use the undo port-group manual command to remove a manual port group.
By default, no manual port group is created.
Examples
# Create a manual port group named group1.
<Sysname> system-view
[Sysname] port-group manual group1
[Sysname-port-group-manual-group1]

1.1.23 reset counters interface

Syntax
reset counters interface [ interface-type [ interface-number ] ]
View
User view
Parameters
interface-type: Port type.
interface-number: Port number.
Description
Use the reset counters interface command to reset statistics for a specified port.
To sample network traffic within a period of time for a port, you need to reset the original
port statistics.
If neither port type nor port number is specified, all port information will be reset;
If only port type is specified, then only information of this particular type of ports will
be reset.
If both port type and port number are specified, then only information of the
specified port will be reset.
Chapter 1 Ethernet Port Configuration
1-24
Commands