Display Tcp Status - H3C S7500E Series Command Manual

Command Manual – IP Addressing and Performance
H3C S7500E Series Ethernet Switches
Keepalive timeout
keepalive probe
Keepalive timeout, so connections
disconnected
Initiated connections
accepted connections
established connections
Closed connections
Packets dropped with MD5
authentication
Packets permitted with MD5
authentication

2.1.8 display tcp status

Syntax
display tcp status
View
Any view
Parameters
None
Description
Use the display tcp status command to display status of all TCP connection for
monitoring TCP connections.
Examples
# Display status of all TCP connections
<Sysname> display tcp status
*: TCP MD5 Connection
TCPCB
03e37dc4
04217174
Field
Local Add:port
0.0.0.0:4001
100.0.0.204:23
2-13
Chapter 2 IP Performance Configuration
Description
Number of keepalive timer timeouts
Number of keepalive probe packets sent
Number of connections broken due to
keepalive timer timeouts
Number of connections initiated
Number of connections accepted
Number of connections established
Number of connections closed; in brackets
are connections closed accidentally (before
receiving SYN from the peer) and
connections closed initiatively (after
receiving SYN from the peer)
Number of packets dropped with MD5
authentication
Number of packets permitted with MD5
authentication
Foreign Add:port
0.0.0.0:0
100.0.0.253:65508
Commands
State
Listening
Established