Display Storm-Constrain - H3C S7500E Series Command Manual

Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
If you provide the all keyword, this command displays the details for all manual
port groups, including their names and the Ethernet ports included.
Absence of parameters indicates that the names of all port groups will be
displayed.
Examples
# Display the names of all the port groups.
<Sysname> display port-group manual
The following manual port group exist(s):
group1
# Display details of all the manual port groups.
<Sysname> display port-group manual all
Member of group1:
Ethernet2/0/4
Member of group2:
None
Table 1-5 Description on the fields of the display port-group manual command
The following manual port group exist(s)
Member of group

1.1.7 display storm-constrain

Syntax
display storm-constrain [ broadcast | multicast ] [ interface interface-type
interface-number ]
View
Any view
Parameters
broadcast: Displays the information about storm constrain for broadcast packets.
multicast: Displays the information about storm constrain for multicast packets.
interface interface-type interface-number: Specifies a port by its number and type. The
storm constrain information about the port will be displayed.
Ethernet2/0/6
Field
1-10
Chapter 1 Ethernet Port Configuration
group2
Description
List of the existing port groups
Member of the manual port group
Commands