Display Ipv6 Routing-Table Acl - H3C S7500E Series Command Manual

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Parameters
None
Description
Use the display ipv6 routing-table command to display brief routing table information,
including destination IP address and prefix, protocol type, priority, metric, next hop and
outbound interface.
The command displays only active routes, namely, the brief information about the
current optimal routes.
Examples
# Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table :
Destination : ::1/128
NextHop
Interface
Table 1-9 Description on the fields of the display ipv6 routing-table command
Destination
NextHop
Preference
Interface
Protocol
Cost

1.1.12 display ipv6 routing-table acl

Syntax
display ipv6 routing-table acl acl6-number [ verbose ]
View
Any view
Destinations : 1
: ::1
: InLoop0
Field
Chapter 1 Routing Overview Commands
Routes : 1
Protocol
Preference : 0
Cost
Destination IPv6 address
Next hop
Routing preference
Outbound interface
Routing protocol of the route
Routing cost
1-18
: Direct
: 0
Description