H3C S7500E Series Command Manual page 282

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
RIP process : 1
RIP version : 1
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Hostroutes : Enabled
Maximum number of balanced paths : 4
Update time
Suppress time :
TRIP retransmit time :
TRIP response packets retransmit count :
Silent interfaces : None
Default routes : Disabled
Verify-source : Enabled
Networks :
Configured peers : None
Triggered updates sent : 0
Number of routes changes : 0
Number of replies to queries : 0
Table 2-1 Description on the fields of the display rip command
Public VPN-instance name (or Private
VPN-instance name)
RIP process
RIP version
Preference
Checkzero
Default-cost
Summary
Hostroutes
Maximum number of balanced paths
Update time
Timeout time
: 30 sec(s)
120 sec(s)
192.168.1.0
Field
Chapter 2 RIP Configuration Commands
Timeout time
Garbage-collect time :
5 sec(s)
The RIP process runs under a public
VPN instance/The RIP process runs
under a private VPN instance
RIP process ID
RIP version 1 or 2
RIP route priority
Indicates whether the zero field check is
enabled for RIPv1 messages.
Default cost of the redistributed routes
Indicates whether the routing
summarization is enabled
Indicates whether to receive host routes
Maximum number of load balanced
routes
RIP update interval
RIP timeout time
2-4
: 180 sec(s)
120 sec(s)
36
Description