H3C S7500E Series Command Manual page 144

Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
Description
Use the display storm-constrain command to display the information about storm
constrain.
If you provide no argument or keyword, this command displays the information about
storm constrain for all types of packets on all the ports.
Examples
# Display the information about storm constrain for all types of packets on all the ports.
<Sysname> display storm-constrain
Flow Statistic Interval: 10(second)
PortName
--------------------------------------------------------------------------
Eth2/0/1
Table 1-6 Description on the fields of the display storm-constrain command
Flow Statistic Interval
PortName
StormType
LowerLimit
UpperLimit
Ctr-mode
Status
Trap
Log
Swi-num
StormType LowerLimit UpperLimit Ctr-mode Status Trap Log Swi-num
broadcast 50
Field
Interval for generating storm constrain statistics
Simplified port index
Type of the packets for which storm constrain function is
enabled, which can be broadcast (for broadcast packets),
multicast (for multicast packets)
Lower threshold (in pps)
Upper threshold (in pps)
Action to be taken when the upper threshold is reached,
which can be block, shutdown, and N/A.
Port state, which can be normal (indicating the port
operates properly), control (indicating the port is blocked
or shut down).
State of trap messages sending. "on" indicates trap
message sending is enabled; "off" indicates trap
message sending is disabled.
State of log sending. "on" indicates log sending is
enabled; "off" indicates log sending is disabled.
Number of the forwarding state switching.
This field is numbered modulo 65,536.
Chapter 1 Ethernet Port Configuration
200 N/A
Description
1-11
Commands
normal on on 0