Display Interface - H3C S7500E Series Command Manual

Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
Protocol-link
Protocol type
Main IP
The brief information of interface(s)
under bridge mode
Speed
Duplex
PVID
Table 1-2 Acronyms for different types of ports
Ethernet
GigabitEthernet
Ten-GigabitEthernet

1.1.4 display interface

Syntax
display interface [ interface-type [ interface-number ] ]
View
Any view
Parameters
interface-type: Type of a specified port.
interface-number: Number of a specified port.
Description
Use the display interface command to display the current state of a specified port and
related information.
If neither port type nor port number is specified, all port information will be
displayed;
If only port type is specified, then only information of this particular type of port will
be displayed.
Field
Port name
1-5
Chapter 1 Ethernet Port Configuration
Description
Port protocol link state, which can be up or
down
Port protocol type
Main IP
Brief information of port(s) in bridge mode
Port rate, in bps
Duplex mode, which can be half (half duplex),
full (full duplex), or auto (auto-negotiation).
Default VLAN ID
Acronyms
Eth
GE
XGE
Commands