H3C S7500E Series Command Manual page 158

Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
Examples
# Clear the statistics on Ethernet 2/0/1.
<Sysname> reset counters interface ethernet 2/0/1
1.1.24 shutdown
Syntax
shutdown
undo shutdown
View
Ethernet port view
Parameters
None
Description
Use the shutdown command to shut down an Ethernet port.
Use the undo shutdown command to turn on Ethernet port.
In certain circumstances, modification to the port parameters does not immediately
take effect, and therefore, you need to shut down the relative port to make the
modification work.
Examples
# Shut down the port Ethernet 2/0/1.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] shutdown
# Bring up the port Ethernet 2/0/1.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] undo shutdown
1.1.25 speed
Syntax
speed { 10 | 100 | 1000 | auto }
undo speed
Chapter 1 Ethernet Port Configuration
1-25
Commands