H3C S7500E Series Command Manual page 249

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
192.168.0.0/24
192.168.0.136/32
For detailed description of the above output, see
# Display detailed information about both active and inactive routes permitted by basic
ACL 2000.
<Sysname> display ip routing-table acl 2000 verbose
Routes Matched by Access list : 2000
Summary Count : 2
Destination: 192.168.0.0/24
Protocol: Direct
Preference: 0
NextHop: 192.168.0.136
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
Destination: 192.168.0.136/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
For the description of the command output above,
1.1.5 display ip routing-table ip-address
Syntax
display ip routing-table ip-address [ mask-length | mask ] [ longer-match ]
[ verbose ]
display ip routing-table ip-address1 { mask-length | mask } ip-address2 { mask-length
| mask } [ verbose ]
View
Any view
Parameters
ip-address: Destination IP address, in dotted decimal format.
Direct 0
Direct 0
State: Active Adv
Tag: 0
State: Active NoAdv
Tag: 0
Chapter 1 Routing Overview Commands
0 192.168.0.136
0 127.0.0.1
Table 1-4.
Process ID: 0
Cost: 0
Interface: Vlan-interface1
Neighbor : 0.0.0.0
Label: NULL
Age: 1d04h26m42s
Process ID: 0
Cost: 0
Interface: InLoopBack0
Neighbor : 0.0.0.0
Label: NULL
Age: 1d04h26m42s
seeTable
1-9
Vlan1
InLoop0
1-5.