Qinq Ethernet-Type Customer-Tag - H3C S7500E Series Command Manual

Command Manual – QinQ-BPDU Tunneling
H3C S7500E Series Ethernet Switches
[Sysname-Ethernet2/0/2] interface ethernet 2/0/3
[Sysname-Ethernet2/0/3] port link-aggregation group 1
[Sysname-Ethernet2/0/3] quit
[Sysname] port-group aggregation 1
[Sysname-port-group-aggregation-1] qinq enable

1.1.5 qinq ethernet-type customer-tag

Syntax
qinq ethernet-type customer-tag hex-value
undo qinq ethernet-type customer-tag
View
System view
Parameters
hex-value: Hexadecimal protocol type ID, in the range of 0x0001 to 0xFFFF, but you
cannot set it to any of the protocol type values listed in
Table 1-1 Common protocol type values
ARP
PUP
RARP
IP
IPv6
PPPoE
MPLS
IPX/SPX
IS-IS
LACP
802.1x
Cluster
Reserved
Protocol type
1-4
Chapter 1 QinQ Configuration Commands
Table 1-1.
Value
0x0806
0x0200
0x8035
0x0800
0x86DD
0x8863/0x8864
0x8847/0x8848
0x8137
0x8000
0x8809
0x888E
0x88A7
0xFFFD/0xFFFE/0xFFFF