Display Brief Interface - H3C S7500E Series Command Manual

Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
Examples
# Configure the description of port Ethernet 2/0/1 as lanswitch-interface.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] description lanswitch-interface

1.1.3 display brief interface

Syntax
display brief interface [ interface-type [ interface-number ] ] [ | { begin | include |
exclude } text ]
View
Any view
Parameters
interface-type: Type of a specified port.
interface-number: Number of a specified port.
|: Uses a regular expression to filter output information.
begin: Displays the line that matches the regular expression and all the subsequent
lines. For detailed description on regular expression, refer to System Maintaining and
Debugging Configuration.
include: Displays the lines that match the regular expression.
exclude: Displays the lines that do not match the regular expression.
text: Regular expression. a string of 1 to 256 characters. Note that this argument is
case-sensitive.
Description
Use the display brief interface command to display brief port information, including
simple port name, link state, protocol link state, protocol type, and main IP address.
If neither port type nor port number is specified, all port information will be
displayed;
If only port type is specified, then only information of this particular type of port will
be displayed.
If both port type and port number are specified, then only information of the
specified port will be displayed.
Related commands: interface.
Chapter 1 Ethernet Port Configuration
1-3
Commands