Display Udp Statistics - H3C S7500E Series Command Manual

Command Manual – IP Addressing and Performance
H3C S7500E Series Ethernet Switches
Table 2-7 Description on the fields of the display tcp status command
*
TCPCB
Local Add:port
Foreign Add:port
State

2.1.9 display udp statistics

Syntax
display udp statistics
View
Any view
Parameters
None
Description
Use the display udp statistics command to display statistics of UDP packets.
Related commands: reset udp statistics.
Examples
# Display statistics of UDP packets.
<Sysname> display udp statistics
Received packets:
Total: 0
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 0
Field
If the status information of a TCP connection contains *, the
TCP adopts the MD5 algorithm for authentication.
TCP control block
Local IP address and port number
Remote IP address and port number
State of the TCP connection
Chapter 2 IP Performance Configuration
Description
2-14
Commands