Display User-Bind - H3C S7500E Series Command Manual

Command Manual – IP Source Guard
H3C S7500E Series Ethernet Switches
Table 1-1 Description on the fields of the display ip check source command
Field
MAC
IP
Vlan
Port
Status
2 binding
entries queried,
2 listed

1.1.2 display user-bind

Syntax
display user-bind [ interface interface-type interface-number | ip-address ip-address
| mac-address mac-address ]
View
Any view
Parameters
interface interface-type interface-number: Displays the static bindings of the interface
specified by it type and number.
ip-address ip-address: Displays the static bindings of an IP address.
mac-address mac-address: Displays the static bindings of an MAC address (in the
format of H-H-H).
Description
Use the display user-bind command to display static bindings.
With no options specified, the command displays static bindings of all interfaces.
Related commands: user-bind.
Examples
# Display all static bindings.
MAC address of the dynamic binding. N/A means that no MAC
address is bound in the entry.
IP address of the dynamic binding. N/A means that no IP address
is bound in the entry.
VLAN to which the obtained binding entry belongs. N/A means
that no VLAN is bound in the entry.
Port to which the dynamic binding entry is applied
Type of dynamically obtaining the binding entry. DHCP-SNP
means that the binding is dynamically obtained from DHCP
snooping.
Counts of dynamic binding entries
1-2
Chapter 1 IP Source Guard Commands
Description