H3C S7500E Series Command Manual page 137

Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
Examples
# Display brief information of port(s).
<Sysname> display brief interface
The brief information of interface(s) under route mode:
Interface
Loop0
NULL0
Tun0
Vlan1
Vlan2
The brief information of interface(s) under bridge mode:
Interface
Eth2/0/1
Eth2/0/2
Eth2/0/3
Eth2/0/4
Eth2/0/5
Eth2/0/6
Eth2/0/7
(The remain output information is omitted.)
# Display brief port information that contains the string UP.
<Sysname> display brief interface | include UP
The brief information of interface(s) under route mode:
Interface
Loop0
NULL0
Vlan2
The brief information of interface(s) under bridge mode:
Interface
Eth2/0/2
Table 1-1 Description on the fields of the display brief interface command.
The brief information of interface(s)
under route mode
Interface
Link
Link Protocol-link
UP UP(spoofing)
UP UP(spoofing)
DOWN DOWN
DOWN DOWN
UP UP
Link Speed
DOWN auto
UP 100M(a)
DOWN auto
DOWN auto
DOWN auto
DOWN auto
DOWN auto
Link Protocol-link
UP UP(spoofing)
UP UP(spoofing)
UP UP
Link Speed
UP 100M(a)
Field
1-4
Chapter 1 Ethernet Port Configuration
Protocol type
LOOP
NULL
TUNNEL
ETHERNET
ETHERNET
Duplex Link-type
auto access
full(a) access
auto access
auto access
auto access
auto access
auto access
Protocol type
LOOP
NULL
ETHERNET
Duplex Link-type
full(a) access
Description
Brief information of port(s) in route mode
Port name
Port physical link state, which can be up or
down
Commands
Main IP
10.1.1.1
--
--
2.2.2.2
1.1.1.1
PVID
1
1
1
1
1
1
1
Main IP
10.1.1.1
--
1.1.1.1
PVID
1