H3C S7500E Series Command Manual page 287

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Table 2-4 Description on the fields of the display rip route command
Route Flags
Peer 21.0.0.23 on
Vlan-interface1
Destination/Mask
Nexthop
Cost
Tag
Flags
Sec
# Display the routing statistics of RIP process 1.
<Sysname> display rip 1 route statistics
Peer
21.0.0.23
21.0.0.12
Total
Table 2-5 Description on the fields of the display rip route statistics command
Field
Peer
Aging
Permanent
Garbage
Total
Field Description
R — RIP route
T — TRIP route
P — The route never expires
A — The route is aging
S — The route is suppressed
G — The route is in Garbage-collect state
Routing information learned on a RIP interface from the
specified neighbor
Destination IP address and subnet mask
Next hop of the route
Cost of the route
Route tag
Indicates the route state
Remaining time of the timer corresponding to the route state
Aging Permanent
2 0
2 0
4 0
IP address of a neighbor
Total number of aging routes learned from the specified neighbor
Total number of permanent routes learned from the specified
neighbor
Total number of routes in the garbage-collection state learned
from the specified neighbor
Total number of routes learned from all RIP neighbors
2-9
Chapter 2 RIP Configuration Commands
Garbage
3
4
7
Description