Chapter 1 Qinq Configuration Commands - H3C S7500E Series Command Manual

Command Manual – QinQ-BPDU Tunneling
H3C S7500E Series Ethernet Switches

Chapter 1 QinQ Configuration Commands

1.1 QinQ Configuration Commands
1.1.1 classifier behavior
Syntax
classifier classifier-name behavior behavior-name
undo classifier classifier-name
View
Policy view
Parameters
classifier-name: Name of a class, a string of 1 to 31 characters.
behavior-name: Name of a traffic behavior, a string of 1 to 31 characters.
Description
Use the classifier behavior command to associate a traffic behavior with a class.
Use the undo classifier command to remove the association.
Note that each class can be associated with only one traffic behavior.
Related commands: qos policy.
Note:
In a QoS policy with multiple class-to-traffic-behavior associations, if the action of
creating an outer VLAN tag is configured in a traffic behavior, we recommend you not to
configure any other action in this traffic behavior. Otherwise, the QoS policy may not
function as expected after it is applied.
Examples
# Associate the behavior test with the class database in the policy user1.
<Sysname> system-view
[Sysname] qos policy user1
[Sysname-qospolicy-user1] classifier database behavior test
Chapter 1 QinQ Configuration Commands
1-1