H3C S7500E Series Command Manual page 20

Command Manual – Login
H3C S7500E Series Ethernet Switches
Parameters
value: Size of the history command buffer. This argument ranges from 0 to 256 and
defaults to 10. That is, the history command buffer can store 10 commands by default.
Description
Use the history-command max-size command to set the size of the history command
buffer.
Use the undo history-command max-size command to revert to the default history
command buffer size.
Examples
# Set the size of the history command buffer to 20 to enable it to store up to 20
commands.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] history-command max-size 20
1.1.12 idle-timeout
Syntax
idle-timeout minutes [ seconds ]
undo idle-timeout
View
User interface view
Parameters
minutes: Number of minutes. This argument ranges from 0 to 35,791.
seconds: Number of seconds. This argument ranges from 0 to 59.
Description
Use the idle-timeout command to set the timeout time. The connection to a user
interface is terminated if no operation is performed in the user interface within the
specified period.
Use the undo idle-timeout command to revert to the default timeout time.
You can use the idle-timeout 0 command to disable the timeout function.
The default timeout time is 10 minutes.
Chapter 1 Commands for Logging into an
1-12
Ethernet Switch