H3C S7500E Series Command Manual page 33

Command Manual – Login
H3C S7500E Series Ethernet Switches
System View: return to User View with Ctrl+Z.
[Sysname] sysname ABC
[ABC]
1.1.27 telnet
Syntax
telnet remote-system [ port-number ] [ source { ip ip-address | interface interface-type
interface-number } ]
View
User view
Parameters
remote-system: IP address or host name of the remote system. The host name is a
string of 1 to 20 characters, which can be specified using the ip host command.
port-number: TCP port number assigned to Telnet service on the remote system, in the
range 0 to 65535.
ip-address: Source IP address of the packets sent by the Telnet client.
interface-type interface-number: Type and number of the interface through which the
Telnet client sends packets.
Description
Use the telnet command to Telnet to another switch from the current switch to manage
the former remotely. You can terminate a Telnet connection by pressing <Ctrl + K>.
Related commands: display tcp status, ip host.
Examples
# Telnet to the switch with the host name of Sysname2 and IP address of 129.102.0.1
from the current switch (with the host name of Sysname1).
<Sysname1> telnet 129.102.0.1
Trying 129.102.0.1 ...
Press CTRL+K to abort
Connected to 129.102.0.1 ...
**************************************************************************
* Copyright (c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
**************************************************************************
<Sysname2>
Chapter 1 Commands for Logging into an
1-25
Ethernet Switch
*
*