Modem Auto-Answer - H3C S7500E Series Command Manual

Command Manual – Login
H3C S7500E Series Ethernet Switches
1.1.14 modem
Syntax
modem [ both | call-in | call-out ]
undo modem [ both | call-in | call-out ]
View
AUX interface view
Parameters
both: Allows both incoming and outgoing calls.
call-in: Allows incoming calls only.
call-out: Allows outgoing calls only.
Description
Use the modem command to enable the switch-side modem to accept incoming calls,
initiate outgoing calls, or both.
Use the undo modem command to remove the modem dial-up configuration.
By default, modem calls are not allowed.
Examples
# Enable the modem to accept both incoming and outgoing calls.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] modem both

1.1.15 modem auto-answer

Syntax
modem auto-answer
undo modem auto-answer
View
AUX interface view
Parameters
None
Chapter 1 Commands for Logging into an
1-14
Ethernet Switch