H3C S7500E Series Command Manual page 10

Command Manual – Login
H3C S7500E Series Ethernet Switches
To verify the configuration, do the following:
# Exit the terminal session on the aux port, and enter <s> at the prompt of "Please
press ENTER". You will see the terminal session being started.
[Sysname-ui-aux0] return
<Sysname> quit
**************************************************************************
* Copyright (c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
**************************************************************************
User interface aux0 is available.
Please press ENTER.
<Sysname>
%Apr 28 04:33:11:611 2005 Sysname SHELL/5/LOGIN: Console login from aux0
1.1.2 authentication-mode
Syntax
authentication-mode { none | password | scheme [ command-authorization ] }
View
User interface view
Parameters
none: Does not authenticate users.
password: Authenticates users using the local password.
scheme: Authenticates users locally or remotely using usernames and passwords.
command-authorization:
authentication server.
Description
Use the authentication-mode command to specify the authentication mode.
If you specify the password keyword to authenticate users using the local
password, remember to set the local password using the set authentication
password { cipher | simple } password command.
If you specify the scheme keyword to authenticate users locally or remotely using
usernames and passwords, the actual authentication mode depends on other
Chapter 1 Commands for Logging into an
Performs command
1-2
Ethernet Switch
authorization on
*
*
TACACS