ADTRAN AOS Version R10.1.0 Command Reference Manual page 2336

Command Reference Guide
hold-queue <value> out
Use the hold-queue out command to change the overall size of an interface's wide area network (WAN)
output queue. Use the no form of this command to return to the default setting.
Syntax Description
<value>
Default Values
The default queue size for weighted fair queuing (WFQ) is 400. The default queue size for Point-to-Point
Protocol (PPP) first in, first out (FIFO) and Frame Relay round-robin is 200.
Command History
Release 9.1
Usage Examples
The following example sets the overall output queue size to 700:
(config)#interface hdlc 1
(config-hdlc 1)#hold-queue 700 out
60000CRG0-35E
The total number of packets the output queue can contain before packets
are dropped. Range is 16 to 1000 packets.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
HDLC Interface Command Set
2336