Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3700

debug http sessiondb
show [ip] http
Configuration File Manager Commands
configuration apply filename [at hh:mm month dd [year]] | [in hh[:mm]] [verbose]
configuration error-file limit number
show configuration status
configuration cancel
configuration syntax check path/filename [verbose]
configuration snapshot feature_list [path/filename]
show configuration snapshot [feature_list]
write terminal
SNMP Commands
snmp station {ip_address | ipv6_address} {[udp_port
disable]}
no snmp station {ip_address | ipv6_address}
snmp soure ip preferred {default | no-loopback | ip_address}
no snmp source ip preferred
show snmp station
snmp community map community_string {[user useraccount_name] | {enable | disable}}
no snmp community map community_string
snmp community map mode {enable | disable}
show snmp community map
snmp security {no security | authentication set | authentication all | privacy set | privacy all |
trap only}
show snmp security
show snmp statistics
show snmp mib family [table_name]
snmp trap absorption {enable | disable}
snmp trap to webview {enable | disable}
|
snmp trap replay {ip_address ipv6_address
snmp trap filter {ip_address | ipv6_address} trap_id_list
no snmp trap filter {ip_address | ipv6_address
snmp authentication trap {enable | disable}
show snmp trap replay
show snmp trap filter
show snmp authentication trap
show snmp trap config
OmniSwitch CLI Reference Guide
] [ ]
username [v1 | v2 | v3] [enable |
}
[seq_id]
}
trap_id_list
June 2012
DNS Commands
ip domain-lookup
no ip domain-lookup
ip name-server server-address1 [server-address2 [server-address3]]
no ip name-server {server-address1 [server-address2 [server-address3]] | all}
ipv6 name-server server-ipv6_address1 [server-ipv6_address2 [server-ipv6_address3]]
ip domain-name name
no ip domain-name
show dns
page 32 Configuration File Manager Commands