Network Time Protocol Commands - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

[configure] copy working certified [flash-synchro]
[configure] copy flash-synchro
takeover [with-fabric]
show running-directory
show reload [status]
show microcode [working | certified | loaded]
show microcode history [working | certified]
show microcode issu
usb {enable | disable}
usb auto-copy {enable | disable}
usb disaster-recovery {enable | disable}
mount [/uflash]
umount /uflash
show usb statistics
Chassis Management and Monitoring Commands
system contact text_string
system name text_string
system location text_string
system date [mm/dd/yyyy]
system time [hh:mm:ss]
system time-and-date synchro
system timezone [timezone_abbrev | offset_value | time_notation]
system daylight savings time [{enable | disable} | start {week} {day} in {month} at {hh:mm}
end {week} {day} in {month} at {hh:mm} [by min]]
reload ni [slot] number
reload all [in [hours:] minutes | at hour:minute [month day | day month]]
reload all cancel
reload pass-through slot-number
power ni [slot] slot-number
no power ni [slot] slot-number
temp-threshold temp slot slot-number
stack set slot slot-number {saved-mode {OS6850E | OS6850} | saved-slot slot-number
[reload]}
stack clear slot slot-number
show system
show hardware info
show chassis [number]
show cmm [number]
show ni [number]
show module [number]
show module long [number]
show module status [number]
OmniSwitch CLI Reference Guide June 2012
show power [supply] [number]
show fan [number]
show temperature [number]
show stack topology [slot-number]
show stack status
hash-control {brief | extended [udp-tcp-port] | load-balance non-ucast {enable | disable}}
hash-control extended no udp-tcp-port
show hash-control [non-ucast]
license apply
show license info
show license file
Chassis MAC Server (CMS) Commands
mac-range eeprom start_mac_address count
enable | disable
mac-retention status {
mac-retention dup-mac-trap {
mac release
show mac-range [index]
show mac-range [index] alloc
show mac-retention status

Network Time Protocol Commands

no ntp server {ip_address}
ntp server synchronized
ntp server unsynchronized
ntp client {enable | disable}
ntp src-ip preferred {default | no-loopback0 | ip_address}
no ntp src-ip preferred
ntp broadcast {enable | disable}
ntp broadcast-delay microseconds
ntp key key [trusted | untrusted]
ntp key load
ntp authenticate {enable | disable}
ntp master {stratum-number}
ntp interface {interface-ip} {enable | disable}
ntp max-associations {number}
ntp broadcast {broadcast-addr} [version version] [minpoll poll interval]
no ntp broadcast {broadcast-addr}
ntp peer {ip-address} [key keyid] [version version] [minpoll poll interval]
no ntp peer {ip-address}
show ntp status
show ntp client
page 30
}
enable | disable
}
Chassis Management and Monitoring Commands