Monitor Link Configuration Commands - H3C S3100 Series Command Manual

2

Monitor Link Configuration Commands

Currently, only S3100-EI series Ethernet switches support the monitor link feature.
Monitor Link Configuration Commands
display monitor-link group
Syntax
display monitor-link group { group-id| all }
View
Any view
Parameter
group-id: Monitor Link group ID, ranging 1 to 24.
all: Specifies all the Monitor Link groups.
Description
Use the display monitor-link group command to display Monitor Link group information.
Example
# Display the information about Monitor Link group 1.
<Sysname> display monitor-link group 1
Monitor link group 1 information:
Member Role
----------------------------------------------------------------------
SMLK-2 UPLINK
AGG-1 DOWNLINK
Table 2-1 Description on the fields of the display monitor-link group command
Field
Member
Role
Status
Status Last-up-time
UP 16:37:20 2006/4/21
UP
Member of the Monitor Link group
Role of Monitor Link group member port: UPLINK or DOWNLINK
Status of Monitor Link group member port: UP or DOWN
Last-down-time
16:37:20 2006/4/20
Description
2-1