Usage guidelines
If the number of history records in an NQA operation exceeds the maximum number, the earliest history
record is removed.
Examples
# Configure the maximum number of history records that can be saved in an NQA operation as 10.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-record number 10
http-version
Use http-version to specify the HTTP version used in the HTTP operation.
Use undo http-version to restore the default.
Syntax
http-version v1.0
undo http-version
Default
HTTP 1.0 is used in the HTTP operation.
Views
HTTP operation view
Default command level
2: System level
Parameters
v1.0: Uses HTTP version 1.0.
Examples
# Configure the HTTP operation to use the HTTP version 1.0.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] http-version v1.0
mode
Use mode to set the data transmission mode for the FTP operation.
Use undo mode to restore the default.
Syntax
mode { active | passive }
undo mode
Default
The data transmission mode use by the FTP operation is active.
34