Operation In Case Of Re-Setting Due To Error During Operation, Etc - Renesas RZ/A Series User Manual

Hide thumbs Also See for RZ/A Series:

Table of Contents

RZ/A1L Group, RZ/A1LU Group, RZ/A1LC Group

Operation in Case of Re-Setting Due to Error during Operation, etc.

If an error occurs during operation of this module, the module output should be cut by the system. Cutoff is performed by

switching the pin output to port output with the general I/O port and outputting the inverse of the active level. The pin

initialization procedures for re-setting due to an error during operation, etc., and the procedures for restarting in a

different mode after re-setting, are shown below.

This module has six operating modes, as stated above. There are thus 36 mode transition combinations, but some

transitions are not available with certain channel and mode combinations. Possible mode transition combinations are

shown in Table 10.57.

Mode Transition Combinations

Normal: Normal mode

Phase counting modes 1 to 4

Complementary PWM mode

Reset-synchronized PWM mode

R01UH0437EJ0600 Rev.6.00

Jan 29, 2021

10. Multi-Function Timer Pulse Unit 2

Rz/a1 series Rz/a1lu series Rz/a1lc series