Reference Plane - Leica FlexLine TS02 User Manual

Applications
Next step
9.15
Availability
Description
Messages
QUIT Traverse Application?
Current Station data will be
lost.
Tolerances exceeded.
Accept?
Traverse points are
recalculated and newly
stored.
• Either, after the adjustment the TraversePRO application is exited.
• Or, press ESC to exit the application.

Reference Plane

Optional
Reference Plane is an application used to measure points relative to a reference
plane. It can be used for the following tasks:
• Measuring a point to calculate and store the perpendicular offset to the plane.
• Calculating the perpendicular distance from the intersection point to the local X-
and Z-axis. The intersection point is the footprint point of the perpendicular
vector from the measured point through the defined plane.
Description
Quitting the application returns to the MAIN
MENU. The traverse can be continued later, but
the current station data will be lost.
The tolerance limits have been exceeded. If not
accepted, the calculations can be redone.
An information message displayed while the
adjustment is calculated.

FlexLine, 216
