Reference Plane - Leica TS03 User Manual

Next step
7.7
Description
100
Description of fields
Field Option
Display only
ΔHz
D Display only
D
Display only
Either, press Meas to measure and record.
•
Or, press Back to return to the Reference Arc - Info screen.
•
Or, continue selecting ESC to exit the app.
•

Reference Plane

Reference Plane is an app used to measure points relative to a reference plane.
It can be used for the following tasks:
• Measuring a point to calculate and store the perpendicular offset to the
plane.
• Calculating the perpendicular distance from the intersection point to the
local X- and Z-axis. The intersection point is the footprint point of the per-
pendicular vector from the measured point through the defined plane.
• Viewing, storing and staking out the coordinates of the intersection point.
A reference plane is created by measuring three points on a plane. These three
points define a local coordinate system:
The first point is the origin of a local coordinate system.
•
• The second point defines the direction of the local Z-axis.
The third point defines the plane.
•
Description
Horizontal direction from the measured point
to the stake out point. Positive if the tele-
scope must be turned clockwise to the stake
out point.
Horizontal distance from the measured point
to the stake out point. Positive if the stake
out point is further away than the measured
point.
Height difference from the measured point to
the stake out point. Positive if the stake out
point is higher than the measured point.
Apps