Reference Plane & Face Scan; Overview - Leica TPS1200 series Technical Reference Manual

Hide thumbs Also See for TPS1200 series:

Table of Contents

Reference Plane & Face Scan

Reference plane tasks

Activating the applica-

tion program

Properties of measured

Reference Plane & Face Scan

The Reference Plane & Face Scan application program can be used to measure points rela-

tive to a reference plane. A reference plane can also be scanned via Face Scan.

The Reference Plane & Face Scan application program can be used for the following tasks:

Measuring points to calculate and store the perpendicular distance to the plane.

Viewing and storing the instrument and/or local coordinates of the measured points.

Viewing and storing the height difference from the measured points to the plane.

Scanning a defined area.

Face scan is available for motorised instruments with reflectorless EDM.

Planes can only be computed with grid coordinates.

The Reference Plane application program must be activated via a licence key. Refer to "28

Tools...\Licence Keys" for information on how to activate the application program.

The properties stored with measured points are:

Reference Plane