Measuring Points To A Reference Plane - Leica TPS1200 series Technical Reference Manual

Reference Plane & Face Scan
43.5
Measure points to plane
step-by-step

Measuring Points to a Reference Plane

Step Description
1. Refer to "43.2 Accessing Reference Plane" to access REFPLANE Reference
Plane Begin.
2. CONT (F1) to access REFPLANE Choose Task & Reference Plane.
3. REFPLANE Choose Task & Reference Plane
Select a reference plane. Refer to paragraph "Select a reference plane from the
job step-by-step".
4. CONT (F1) to access REFPLANE Measure Points to Plane, Reference page.
5. REFPLANE Measure Points to Plane, Reference page
<Offset ÄPer d:> The perpendicular distance between measured point and
adjusted plane.
<Offset ∆Ht:> The vertical distance between measured point and adjusted plane.
For <Use As Origin: Plane Coords>
<X Coordinate:>, <Y Coordinate:> and <Z Coordinate:> are displayed.
For <Use As Origin: Instrumnt Coords>
<Easting:>, <Northing:> and <Height:> are displayed.
CMPR (F4) to calculate offsets to previously measured points.
STORE (F1) to store the results for the point currently being displayed.
DONE (F4) to return to REFPLANE Measure Points to Plane, Reference
page.
TPS1200 1046