Section 10 Programmable Pulse Generator (PPG)
Section 10 Programmable Pulse Generator (PPG)
The programmable pulse generator (PPG) provides pulse outputs by using the 16-bit timer pulse
unit (TPU) as a time base. The PPG pulse outputs are divided into 4-bit groups (groups 3 to 0) that
can operate both simultaneously and independently. Figure 10.1 shows a block diagram of the
PPG.
10.1
Features
• 16-bit output data
• Four output groups
• Selectable output trigger signals
• Non-overlapping mode
• Can operate together with the data transfer controller (DTC)
• Inverted output can be set
• Module stop state specifiable
Rev.2.00 Jun. 28, 2007 Page 389 of 666
REJ09B0311-0200