Renesas H8SX/1650 Hardware Manual page 36

Section 1 Overview
Classification Pin Name
A/D converter AN7 to AN0
ADTRG0
D/A converter DA1
DA0
A/D converter, AV
CC
D/A converter
AV
SS
Vref
I/O ports P17 to P10
P27 to P20
P37 to P30
P57 to P50
P65 to P60
PA6, PA4
PA2 to PA0
PB3 to PB0
PF7 to PF5
PI7 to PI0
Rev.2.00 Jun. 28, 2007 Page 14 of 666
REJ09B0311-0200
I/O Description
Input Input pins for the analog signals to be processed by the A/D
converter.
Input Input pin for the external trigger signal that starts A/D
conversion.
Output Output pins for the analog signals from the D/A converter.

Analog power supply pin for the A/D and D/A converters.
When the A/D and D/A converters are not in use, connect
this pin to the system power supply.

Ground pin for the A/D and D/A converters. Connect this pin
to the system power supply (0 V).

Reference power supply pin for the A/D and D/A converters.
When the A/D and D/A converters are not in use, connect
this pin to the system power supply.
Input/ 8 input/output pins.
output
Input/ 8 input/output pins.
output
Input/ 8 input/output pins.
output
Input 8 input/output pins.
Input/ 6 input/output pins.
output
Input/ 5 input/output pins.
output
Input/ 4 input/output pins.
output
Input/ 3 input/output pins.
output
Input/ 8 input/output pins.
output