Samsung S5PC110 Manual page 448

S5PC110_UM
5.5.2.31 Integration Test Output Read or Set Registers (IECITOP2, R/W, Address = 0xE080_0F24)
IECITOP2
Reserved
IECTGTDCGIDX
5.5.2.32 Integration Test Output Read or Set Registers (IECITOP3, R/W, Address = 0xE080_0F28)
IECITOP3
Reserved
IECTGTDVCIDX
5.5.2.33 Peripheral Identification Register 0 (IECPeriphID0, R, Address = 0xE080_0FE0)
IECPeriphID0
Reserved
Partnumber0
5.5.2.34 Peripheral Identification Register 1 (IECPeriphID1, R, Address = 0xE080_0FE4)
IECPeriphID1
Reserved
Partnumber1
5.5.2.35 Peripheral Identification Register 2 (IECPeriphID2, R, Address = 0xE080_0FE8)
IECPeriphID2
Reserved
Revision
Designer1
Bit
[31:8] Reserved, read undefined, do not modify.
[7:0] Intra-chip outputs. Writes to these bits set the value to be
driven onto the IECTGTDCGIDX [7:0] outputs in integration
test mode. Reads return the value of IECTGTDCGIDX[7:0] at
the output of the test multiplexer. The reset value is 0x00.
Bit
[31:8] Reserved, read undefined, do not modify.
[7:0] Intra-chip outputs. Writes to these bits set the value to be
driven onto the IECTGTDVCIDX[7:0] outputs in integration
test mode.
Reads return the value of IECTGTDVCIDX[7:0] at the output
of the test multiplexer.
The reset value is 0x00.
Bit
[31:8] Reserved, read undefined, do not modify.
[7:0] These bits read back as 0x50
Bit
[31:8] Reserved, read undefined, do not modify.
[7:0] These bits read back as 0x07
Bit
[31:8] Reserved, read undefined, do not modify.
[7:4] These bits read back as 0x0
[3:0] These bits read back as 0x04
5 INTELLIGENT ENERGY MANAGEMENT
Description
Description
Description
Description
Description
Initial State
0
0x00
Initial State
0
0x00
Initial State
X
0x50
Initial State
X
0x07
Initial State
X
0x0
0x04
5-31