Samsung S5PC110 Manual page 447

S5PC110_UM
5.5.2.28 IEC Integration Test Input Read or Set Registers (IECITIP1, R/W, Address = 0xE080_0F14)
IECITIP2
-
IECCRNTDCGIDX
5.5.2.29 IEC Integration Test Input Read or Set Registers (IECITIP1, R/W, Address = 0xE080_0F18)
IECITIP3
-
IECCRNTDVGIDX
5.5.2.30 Integration Test Output Read or Set Registers (IECITOP1, R/W, Address = 0xE080_0F20)
IECITOP1
-
IECSYNCMODEREQ
IECPWRREQ
IECCPUSLPINT
IECCPUWUINT
Bit
[31:8] Reserved, read undefined, do not modify.
[7:0] Intra-chip input.
Writes to these bits set the value to be driven onto the inputs
IECCRNTDCGIDX[7:0], in the integration test mode.
Reads return the value of the IECCRNTDCGIDX[7:0] inputs at
the output of the test multiplexer. The reset value is 0x00.
Bit
[31:8] Reserved, read undefined, do not modify.
[7:0] Intra-chip input.
Writes to these bits set the value to be driven onto the inputs
IECCRNTDVCIDX[7:0], in the integration test mode.
Reads return the value of theIECCRNTDVCIDX[7:0] inputs at
the output of the test multiplexer. The reset value is 0x00.
Bit
[31:4] Reserved, read undefined, do not modify.
[3] Intra-chip output. Writes to this bit set the value to be driven
onto the IECSYNCMODEREQ output in integration test
mode. Reads return the value of IECSYNCMODEREQ at the
output of the test multiplexer. The reset value is 0.
[2] Intra-chip output. Writes to this bit set the value to be driven
onto the IECPWRREQ output in integration test mode. Reads
return the value of IECPWRREQ at the output of the test
multiplexer. The reset value is 0.
[1] Intra-chip output. Writes to this bit set the value to be driven
onto the IECCPUSLPINT output in integration test mode.
Reads return the value of IECCPUSLPINT at the output of
the test multiplexer. The reset value is 0.
[0] Intra-chip output. Writes to this bit set the value to be driven
onto the IECCPUWUINT output in integration test mode.
Reads return the value of IECCPUWUINT at the output of the
test multiplexer. The reset value is 0.
5 INTELLIGENT ENERGY MANAGEMENT
Description
Description
Description
Initial State
0
0x00
Initial State
0
0x00
Initial State
0
0
0
0
0
5-30