S5PC110_UM
1.3.7 SYSTEM PERIPHERAL
The key features of system peripheral include:
•
Real Time Clock
−
Full clock features: sec, min, hour, date, day, month, and year
−
32.768kHz operation
−
Alarm interrupt
−
Time-tick interrupt
•
PLL
−
Four on-chip PLLs, APLL/MPLL/EPLL/VPLL
−
APLL generates ARM core and MSYS clocks
−
MPLL generates a system bus clock and special clocks
−
EPLL generates special clocks
VPLL generates clocks for video interface
−
•
Keypad
−
14x8 Key Matrix support
−
Provides internal de-bounce filter
•
Timer with Pulse Width Modulation
−
Five channel 32-bit internal timer with interrupt-based operation
−
Three channel 32-bit Timer with PWM
−
Programmable duty cycle, frequency, and polarity
−
Dead-zone generation
−
Supports external clock source
•
System timer
−
Accurate timer provides exact 1ms tick at any power mode except sleep
−
Interrupt interval can be changed without stopping reference tick timer
•
DMA
−
Micro-code programming based DMA
−
The specific instruction set provides flexibility to program DMA transfers
−
Supports linked list DMA function
−
Supports three enhanced built-in DMA with eight channels per DMA, so the total number of channels
supported are 24
−
Supports one Memory-to-memory type optimized DMA and two Peripheral-to-memory type optimized
DMA
−
M2M DMA supports up to 16 burst and P2M DMA supports up to 8 burst
•
A/D Converter and Touch Screen Interface
−
10 channel multiplexed ADC
−
Maximum 500Ksamples/sec and 12-bit resolution
•
Watch Dog Timer
•
16-bit watch dog timer
1 OVERVIEW OF S5PC110
1-13