S5PC110_UM
5
USB2.0 HS OTG
5.1 OVERVIEW OF USB2.0 HS OTG
Samsung USB On-The-Go (OTG) is a Dual-Role Device (DRD) controller, which supports both device and host
functions. It is fully compliant with the On-The-Go Supplement to the USB 2.0 Specification, Revision 1.0a. It
supports high-speed (HS, 480-Mbps), full-speed (FS, 12-Mbps), and low-speed (LS, 1.5-Mbps, Host only)
transfers. HS OTG can be configured as a Host-only or Device-only controller.
5.2 KEY FEATURES OF USB2.0 HS OTG
The USB2.0 HS OTG features include:
•
Complies with the On-The-Go Supplement to the USB 2.0 Specification (Revision 1.0a)
•
Operates in High-Speed (480 Mbps), Full-Speed (12 Mbps) and Low-Speed (1.5 Mbps, Host only) modes
•
Supports UTMI+ Level 3 interface (Revision 1.0)
•
Supports Session Request Protocol (SRP) and Host Negotiation Protocol (HNP)
•
Supports only 32-bit data on the AHB
•
1 Control Endpoint 0 for control transfer
•
15 Device Mode programmable Endpoints
−
Programmable endpoint type: Bulk, Isochronous, or Interrupt
−
Programmable IN/ OUT direction
•
Supports 16 Host channels
•
Supports packet-based, dynamic FIFO memory allocation of 7936depths (35-bit width)
5 USB2.0 HS OTG
5-1