1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Computer Hardware
  5. S3C2450
  6. Installation manual

Samsung S3C2450 Installation Manual

Windows ce 5.0
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
S3C2450/ Mobile Solution/ IM-1.0-06-01
Installation Manual for S3C2450
(Windows CE 5.0)
Mobile Solution Group, System LSI
Property of Samsung Electronics Co., Ltd.
i
Public

Advertisement

Table of Contents
loading

Related Manuals for Samsung S3C2450

Summary of Contents for Samsung S3C2450

  • Page 1 S3C2450/ Mobile Solution/ IM-1.0-06-01 Installation Manual for S3C2450 (Windows CE 5.0) Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 2 Copyright © 2004 Samsung Electronics Co, Ltd. All Rights Reserved. Though every care has been taken to ensure the accuracy of this document, Samsung Electronics Co, Ltd. cannot accept responsibility for any errors or omissions or for any loss occasioned to any person, whether legal or natural, from acting, or refraining from action, as a result of the information contained herein.

  • Page 3: Revision History

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Revision History Date Version Author Amendment 2008.03.31 WINCE Team Preliminary draft 2008.05.02 WINCE Team Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 4: Table Of Contents

    CE I USB ( UBOOT) .............66 USING INDOWS MAGE ON USING XIP OS I – W KITL ..............85 UILDING AND UNNING UTILPLE MAGE USB S KITL ............................88 ERIAL Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...
  • Page 5 Figure 6-3 Jumper Setting for DDR Memory............... 67 Figure 6-4 Switch Setting on CPU board for AMD flash boot............ 67 Figure 6-5 Switch Setting on Base board for NandAccess ............67 Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 6 Figure 6-31 Messages via UART Port after NK.nb0 Download ..........93 Figure 6-32 Attach Device ................... 94 Figure 6-33 Platform Builder Window after USB Serial KITL connected ........95 Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 7: Overview

    S3C2450/ Mobile Solution/ IM-1.0-06-01 1 Overview This Installation Manual guides you to install the Samsung S3C2450 Windows CE 5.0 BSP. The manual explains the following topics: • Copying BSP and Setting up Platform Builder • Creating a New Platform •...

  • Page 8: Copying Bsp And Setting Up Platform Builder

    BSP directory name. Figure 2-1 Source Files 2. To start S3C2450 Windows CE 5.0 BSP Porting, on your host PC click Start, point to All Programs, point to Microsoft Windows CE 5.0 and then click on Platform Builder 5.0. The following window appears on your screen.
  • Page 9 S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 2-2 Platform Builder Window Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 10 S3C2450/ Mobile Solution/ IM-1.0-06-01 On the File menu, click Manage Catalog Items…. as shown in the figure below. Figure 2-3 Opening Manage Catalog Items Window Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...
  • Page 11 Figure 2-4 Manage Catalog Items Window 5. Import Catalog Items window appears on your screen. Select SMDK2450.cec file from X:\WINCE500\PLATFORM\SMDK2450 directory and then click Open button. Figure 2-5 Import Catalog Items Window Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 12: S3C2450/ Mobile Solution/ Im-1.0

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...
  • Page 13 ARMV4I BSP is added properly as shown below. If not added properly, then remove SMDK2450.cec file in the Imported .cec files: list from Manage Catalog Items window and then repeat steps 4~7 again. Figure 2-7 Catalog window in Platform Builder Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 14: Creating A New Platform

    In this chapter, you can understand how to create a new platform using the Platform Builder. 1. On the File menu in the Platform Builder window, click New Platform… as shown in figure 3-1. Figure 3-1 Creating New Platform Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.
  • Page 15 S3C2450/ Mobile Solution/ IM-1.0-06-01 2. The following window appears on your screen. Click Next button to continue. Figure 3-2 New Platform Wizard – Step 1 Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 16 3. The Workspace Name And Location window appears on your screen. Type a platform name in the Name box and then click Next button. Figure 3-3 Platform Wizard – Step 2 Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.
  • Page 17 S3C2450/ Mobile Solution/ IM-1.0-06-01 4. The Board Support Packages (BSPs) window appears on your screen. Select SMDK2450: ARMV4I and then click Next button. Figure 3-4 New Platform Wizard – Step 3 Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 18 5. The Design Template wizard window appears on your screen. Please select Mobile Handheld from Available design templates list and then click Next button. Figure 3-5 New Platform Wizard – Step 4 Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.
  • Page 19 6. The following window appears on your screen. Here you select the Application & Media you want to include in your platform and then click Next button. Figure 3-6 New Platform Wizard – Step 5 Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 20 S3C2450/ Mobile Solution/ IM-1.0-06-01 7. The Networking & Communications wizard window appears on your screen. Click Next button. Figure 3-7 New Platform Wizard – Step 6 Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...
  • Page 21 S3C2450/ Mobile Solution/ IM-1.0-06-01 8. The following window appears on your screen. Please read all the security warnings and then click Next button. Figure 3-8 New Platform Wizard – Step 7 Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 22 S3C2450/ Mobile Solution/ IM-1.0-06-01 9. The following window appears on your screen. Click Finish button to complete the process. Figure 3-9 New Platform Wizard – Step 8 Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 23: Building Os Image - Without Kitl

    BSP_NOUSBFN= set BSP_NOCS8900=1 set BSP_NOBACKLIGHT=1 set BSP_NOBATTERY=1 set BSP_NONANDFS=1 set BSP_NOPCCARD=1 @REM 2450 can select MULTIPLEXIP or Single.bin set IMGMULTIXIP= @REM - To support PocketMory call %_TARGETPLATROOT%\src\Whimory\wmrenv.bat Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 24 2. In the Platform Builder window on your host PC, you can see the new platform created along with its various sub-directories on the left hand side as shown in figure 4-1. Figure 4-1 New Platform Items Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.
  • Page 25 Data Store -> Storage Manager, right click on FAT File System and click Add to OS Design as shown in the figure below. Figure 4-2 Adding FAT File System to the Platform Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 26 OS Design. Figure 4-3 which you should add to OS Design Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...
  • Page 27 S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 4-4 Somes which you should add to OS Design Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 28 Figure 4-5 Some which you should add to OS Design When you click right click on OBEX Server and click Add to OS Design. Special Feature Notification window appears on your screen. Click Close button. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.
  • Page 29 5. Expand Core OS node in Catalog window, then expand Windows CE devices -> Graphics and Multimedia Technologies, select all the required Media Components and then Add to OS Design. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 30 S3C2450/ Mobile Solution/ IM-1.0-06-01 6. On the Platform menu, click Settings… as shown in figure 4-7. Figure 4-7 Platform Settings Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...
  • Page 31 It clears all the language settings in your platform. Now select English (United States) as shown in figure 4-8. Figure 4-8 Selecting Language in the Platform Settings Window Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 32: Figure 4-9 Removing Kitl Setting In The Platform Settings Window

    Image After Build if they are not enabled in the Build OS menu on the Platform Builder window. 10. On the Build OS menu, click Build and Sysgen as shown in figure 4-10 to build the Eboot image. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 33: Figure 4-10 Build And Sysgen

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 4-10 Build and Sysgen Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 34: Figure 4-11 Building Process

    Figure 4-11 Building Process Note: Building process may take some time depending on your system capability. So, please wait for the build process to be completed. It might take around 1 hour. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 35: Figure 4-12 After Building The Os Image

    12. After completion of build process, following messages appear as shown below. In Case of Single .bin, EBOOT.nb0, EBOOT.bin, Block0img.nb0, NK.bin and NK.nb0 is now available in X:\WINCE500\PBWorkspaces\[platform name]\RelDir\SMDK2450_ARMV4I_Release directory. Figure 4-12 After Building the OS Image Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 36: Building Chain.lst(Multiple Xip) Image

    The “[ReleaseDirectory]” string can be different depends on your build environment. nk.exe [ReleaseDirectory]\RelDir\smdk2450_ARMV4I_Release\nk.exe XIPKERNEL coredll.dll [ReleaseDirectory]\RelDir\smdk2450_ARMV4I_Release\coredll.dll XIPKERNEL filesys.ese [ReleaseDirectory]\RelDir\smdk2450_ARMV4I_Release\filesys.exe XIPKERNEL binfs.dll [ReleaseDirectory]\RelDir\smdk2450_ARMV4I_Release\binfs.dll XIPKERNEL fsdmgr.dll [ReleaseDirectory]\RelDir\smdk2450_ARMV4I_Release\fsdmgr.dll XIPKERNEL mspart.dll [ReleaseDirectory]\RelDir\smdk2450_ARMV4I_Release\mspart.dll XIPKERNEL default.fdf [ReleaseDirectory]\RelDir\smdk2450_ARMV4I_Release\default.fdf XIPKERNEL Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...
  • Page 37 6. Open the command window using platform builder menu [Build OS]->[Open Release Directory]. Enter the “romimage ce.bib” command Then below files will be generated. Chain.bin Nk.bin Xipkernel.bin Chain.lst Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 38: Single.bin Image

    2. Set the Jumpers to use crystal for clock source. Figure 5-1 Jumper Setting for crystal 3. Set the Jumpers for memory type Figure 5-2 Jumper Setting for SDR Memory Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 39: Figure 5-3 Jumper Setting For Ddr Memory

    5. Please install the USB Driver and DNW application on your host PC. 6. After installing the USB driver, run dnw.exe on the host PC. The following window appears on your screen. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 40: Figure 5-5 Dnw Window

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 5-5 DNW Window Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 41: Figure 5-6 Uart/Usb Options

    Figure 5-6 UART/USB Options 8. On the Serial Port menu, click Connect. Switch ON the reference board and then press any key. The DNW window appears as shown in figure 5-7. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 42: Figure 5-7 Dnw Window After Board Power On

    Figure 5-7 DNW Window after Board Power ON 9. Enter 2 to check whether SDRAM can Read and Write. Now DNW window appears as shown below. Figure 5-8 SDRAM Test Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 43: Figure 5-9 Download & Run

    11. On the USB Port menu, click Transmit and the following window appears on your screen. Select NK.nb0 from X:\WINCE500\PBWorkspaces\[platform name]\RelDir\smdk2450_ARMV4I_Release directory and then click Open button. Figure 5-10 Selecting NK.nb0 for Download Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 44: Figure 5-11 Downloading Status Of Nk.nb0

    12. Once download begins, a download status bar appears on your screen as shown in figure 5-11. Figure 5-11 Downloading Status of NK.nb0 13. After NK.nb0 download is over, Windows CE 5.0 boots on the target Board. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 45: Fusing Windows Ce Image On Smc Via Usb (Using Uboot)

    AMD Flash. 2. Set the Jumpers for clock source. Figure 5-12 Jumper Setting for crystal 3. Set the Jumpers for memory type Figure 5-13 Jumper Setting for SDR Memory Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 46: Figure 5-14 Jumper Setting For Ddr Memory

    Figure 5-16 Switch Setting on Base board for NandAccess 5. Please install the USB Driver and DNW application on your host PC. 6. Run dnw.exe on the host PC. The following window appears on your screen. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 47: Figure 5-17 Dnw Window

    7. On the Configuration menu, click Options to set the UART/USB options. The following window appears on your screen. Select Baud Rate and COM Port as shown in figure 5-18, enter the download address as 0x30038000 and then click OK button. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 48: Figure 5-18 Uart/Usb Options

    8. On the Serial Port menu, click Connect. Switch ON the reference board. The DNW window appears as shown in figure 5-19. Figure 5-19 DNW Window after Board Power ON Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 49: Figure 5-20 Selecting Eboot.nb0 For Download

    9. On the USB Port menu, click Transmit and the following window appears on your screen. Select EBOOT.nb0 file from X:\WINCE500\PBWorkspaces\[platform name]\RelDir\smdk2450_ARMV4I_Release directory and then click Open button. Figure 5-20 Selecting EBOOT.nb0 for Download Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 50: Figure 5-21 After Eboot.nb0 Download

    S3C2450/ Mobile Solution/ IM-1.0-06-01 10. As soon as EBOOT.nb0 download is over, the following messages appear in the DNW window. Figure 5-21 After EBOOT.nb0 Download Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 51: Figure 5-22 Boot Loader Configurations

    Enter [6] to make Program disk Image into Nand Flash: ENABLED • Enter [W] to Write Configuration Right Now • Enter [A] to Format FIL (Erase All Blocks) Figure 5-22 Boot Loader Configurations Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 52 S3C2450/ Mobile Solution/ IM-1.0-06-01 12. Reboot SMDK board. Retry to download Eboot.nb0 image. You can see following Message. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 53: Figure 5-23 Boot Loader Status After Format

    Enter [6] to make Program disk Image into Nand Flash: ENABLED • Enter [5] to make Startup image: LAUNCH EXISTING • Enter [W] to Write Configuration Right Now • Enter [U] to Download image now(USB) Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 54: Figure 5-24 Boot Loader Configurations

    Figure 5-24 Boot Loader configurations 14. On the USB Port menu click UBOOT and the following window appears on your screen. Select block0img.nb0from X:\WINCE500\PBWorkspaces\[platform name]\RelDir\smdk2450_ARMV4I_Release directory and then click Open button. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 55: Figure 5-25 Selecting Block0Img.nb0 For Download

    Figure 5-25 Selecting block0img.nb0 for Download 15. You can see the following messages on the DNW window after block0img.nb0 download is over. Figure 5-26 Messages via UART Port after block0img.nb0 Download Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 56: Figure 5-27 Usb Boot Loader Configurations

    Figure 5-27 USB Boot Loader Configurations 16. On the USB Port menu click UBOOT and the following window appears on your screen. Select Eboot.bin from X:\WINCE500\PBWorkspaces\[platform name]\RelDir\smdk2450_ARMV4I_Release directory and then click Open button. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 57: Figure 5-28 Selecting Eboot.bin For Download

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 5-28 Selecting EBOOT.bin for Download 17. You can see the following messages on the DNW window after Eboot.bin download is over. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 58: Figure 5-29 Messages Via Uart Port After Eboot.bin Download

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 5-29 Messages via UART Port after eboot.bin Download Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 59: Figure 5-30 Usb Boot Loader Configurations

    Figure 5-30 USB Boot Loader Configurations 18. On the USB Port menu click UBOOT and the following window appears on your screen. Select NK.bin from X:\WINCE500\PBWorkspaces\[platform name]\RelDir\smdk2450_ARMV4I_Release directory and then click Open button. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 60: Figure 5-31 Selecting Nk.bin For Download

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 5-31 Selecting NK.bin for Download Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 61: Figure 5-32 Messages Via Uart Port During Nk.bin Download

    Figure 5-33 Switch setting for Nand Advanced NAND(page 2KB, Addr 5) card booting Power ON the board and you can see Windows CE 5.0 boots on the target Board. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 62: Building And Running Single.bin Os Image - With Kitl

    In this chapter, you can understand how to build, download and run the OS image with KITL. 1. To enable KITL, on the Platform menu in the platform builder window, click Settings… as shown in figure 5-34. Figure 5-34 Platform Settings 1 Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 63: Figure 5-35 Platform Settings 2

    3. The Platform Settings window appears on your screen. Check square boxes Enable CE Target Control Support (SYSGEN_SHELL=1) and Enable KITL (no IMGNOKITL=1) and Enable Kernel Debugger(no IMGNODEBUFFER=1) in the Build Options tab and then click OK button Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 64: Figure 5-36 Platform Setting For Kitl

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 5-36 Platform Setting for KITL Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 65: Usb Serial Kitl

    2. On the Build OS menu in platform builder window, click Build and Sysgen as shown in figure 5-37 to build the WinCE image with USB Serial KITL. Figure 5-37 Build and Sysgen Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 66 S3C2450/ Mobile Solution/ IM-1.0-06-01 Note: Building process may take some time depending on your system capability. So, please wait for the build process to be completed. It might take around 1 hour. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 67: Figure 5-38 Selecting Connectivity Options

    Target Device Connectivity Options window appears on your screen. Select None from Download drop down menu box and USB from Transport drop down menu box as shown in figure 5-38. Figure 5-38 Selecting Connectivity Options Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 68: Figure 5-39 Target Device Connectivity Options Window

    6. Disable USB connection on PC ActiveSync Connection Manager. Refer Chapter 6 to download and run the NK.nb0 image via USB. 8. You can see the following messages on the DNW window after NK.nb0 download is over. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 69: Figure 5-40 Messages Via Uart Port After Nk.nb0 Download

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 5-40 Messages via UART Port after NK.nb0 Download 9. On the Target menu in Platform Builder window, click Attach Device as shown in figure 5-41. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 70: Figure 5-41 Attach Device

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 5-41 Attach Device Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 71: Figure 5-42 Platform Builder Window After Usb Serial Kitl Connected

    10. USB Serial KITL gets connected. Windows CE 5.0 boots on the target board and platform builder window appears as shown below in figure 5-42. Figure 5-42 Platform Builder Window after USB Serial KITL connected Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 72: Mulitpple Xip Image

    1. Before you download the WinCE image through the USB, you must have USB monitor image in your AMD Flash. 2. Set the Jumpers for clock source. Figure 6-1 Jumper Setting for crystal 3. Set the Jumpers for memory type Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 73: Figure 6-2 Jumper Setting For Sdr Memory

    Figure 6-4 Switch Setting on CPU board for AMD flash boot Figure 6-5 Switch Setting on Base board for NandAccess 5. Please install the USB Driver and DNW application on your host PC. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 74: Figure 6-6 Dnw Window

    7. On the Configuration menu, click Options to set the UART/USB options. The following window appears on your screen. Select Baud Rate and COM Port as shown in figure 6-7, enter the download address as 0x30038000 and then click OK button. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 75: Figure 6-7 Uart/Usb Options

    8. On the Serial Port menu, click Connect. Switch ON the reference board. The DNW window appears as shown in figure 6-8. Figure 6-8 DNW Window after Board Power ON Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 76: Figure 6-9 Selecting Eboot.nb0 For Download

    9. On the USB Port menu, click Transmit and the following window appears on your screen. Select EBOOT.nb0 file from X:\WINCE500\PBWorkspaces\[platform name]\RelDir\smdk2450_ARMV4I_Release directory and then click Open button. Figure 6-9 Selecting EBOOT.nb0 for Download Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 77: Figure 6-10 After Eboot.nb0 Download

    S3C2450/ Mobile Solution/ IM-1.0-06-01 10. As soon as EBOOT.nb0 download is over, the following messages appear in the DNW window. Figure 6-10 After EBOOT.nb0 Download Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 78: Figure 6-11 Boot Loader Configurations

    Enter [6] to make Program disk Image into Nand Flash: ENABLED • Enter [W] to Write Configuration Right Now • Enter [A] to Format FIL (Erase All Blocks) Figure 6-11 Boot Loader Configurations Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...
  • Page 79 S3C2450/ Mobile Solution/ IM-1.0-06-01 12. Reboot SMDK board. Retry to download Eboot.nb0 image. You can see following Message. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 80: Figure 6-12 Boot Loader Status After Format

    Enter [6] to make Program disk Image into Nand Flash: ENABLED • Enter [5] to make Startup image: LAUNCH EXISTING • Enter [W] to Write Configuration Right Now • Enter [U] to Download image now(USB) Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 81: Figure 6-13 Boot Loader Configurations

    Figure 6-13 Boot Loader configurations 14. On the USB Port menu click UBOOT and the following window appears on your screen. Select block0img.nb0from X:\WINCE500\PBWorkspaces\[platform name]\RelDir\smdk2450_ARMV4I_Release directory and then click Open button. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 82: Figure 6-14 Selecting Block0Img.nb0 For Download

    Figure 6-14 Selecting block0img.nb0 for Download 15. You can see the following messages on the DNW window after block0img.nb0 download is over. Figure 6-15 Messages via UART Port after block0img.nb0 Download Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 83: Figure 6-16 Usb Boot Loader Configurations

    Figure 6-16 USB Boot Loader Configurations 16. On the USB Port menu click UBOOT and the following window appears on your screen. Select Eboot.bin from X:\WINCE500\PBWorkspaces\[platform name]\RelDir\smdk2450_ARMV4I_Release directory and then click Open button. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 84: Figure 6-17 Selecting Eboot.bin For Download

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 6-17 Selecting EBOOT.bin for Download 17. You can see the following messages on the DNW window after Eboot.bin download is over. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 85: Figure 6-18 Messages Via Uart Port After Eboot.bin Download

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 6-18 Messages via UART Port after eboot.bin Download Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 86: Figure 6-19 Usb Boot Loader Configurations

    Figure 6-19 USB Boot Loader Configurations 19. On the USB Port menu click UBOOT(WINCE500) and the following window appears on your screen. Select chain.lst from X:\WINCE500\PBWorkspaces\[platform name]\RelDir\smdk2450_ARMV4I_Release directory and then click Open button. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 87: Figure 6-20 Selecting Uboot(Wince500)

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 6-20 Selecting UBOOT(WINCE500) Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 88: Figure 6-21 Selecting Chain.lst For Download

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 6-21 Selecting Chain.lst for Download Figure 6-22 Messages via UART Port during Chain.lst Download Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 89: Figure 6-23 Messages Via Uart Port After Fusing Chain.lst

    20. You can see the following messages on the DNW window during Chain.bin download. After Chain.bin download is over, Windows CE 5.0 boots on the target Board. Power OFF the board and Set CFG jumpers on the 2450 evaluation board as below. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 90: Figure 6-24 Switch Setting For Nand Advanced Nand(Page 2Kb, Addr 5) Card Booting

    Figure 6-24 Switch setting for Nand Advanced NAND(page 2KB, Addr 5) card booting 21. Power ON the board and you can see Windows CE 5.0 boots on the target Board. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 91: Building And Running Mutilplexip Os Image - With Kitl

    In this chapter, you can understand how to build, download and run the OS image with KITL. 1. To enable KITL, on the Platform menu in the platform builder window, click Settings… as shown in figure 6-25. Figure 6-25 Platform Settings 1 Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 92: Figure 6-26 Platform Settings 2

    3. The Platform Settings window appears on your screen. Check square boxes Enable CE Target Control Support (SYSGEN_SHELL=1) and Enable KITL (no IMGNOKITL=1) and Enable Kernel Debugger(no IMGNODEBUFFER=1) in the Build Options tab and then click OK button Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 93: Figure 6-27 Platform Setting For Kitl

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 6-27 Platform Setting for KITL Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 94: Usb Serial Kitl

    2. On the Build OS menu in platform builder window, click Build and Sysgen as shown in figure 6- 28 to build the WinCE image with USB Serial KITL. Figure 6-28 Build and Sysgen Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.
  • Page 95 Note: Building process may take some time depending on your system capability. So, please wait for the build process to be completed. It might take around 1 hour. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...
  • Page 96 Target Device Connectivity Options window appears on your screen. Select None from Download drop down menu box and USB from Transport drop down menu box as shown in figure 6-29. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI.

  • Page 97: Figure 6-29 Selecting Connectivity Options

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 6-29 Selecting Connectivity Options Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 98: Figure 6-30 Target Device Connectivity Options Window

    6. Click Apply button first and then click Close button. 7. Disable USB connection on PC ActiveSync Connection Manager. Fuse the chain.lst. 9. You can see the following messages on the DNW window after Power on. Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 99: Figure 6-31 Messages Via Uart Port After Nk.nb0 Download

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 6-31 Messages via UART Port after NK.nb0 Download 10. On the Target menu in Platform Builder window, click Attach Device as shown in figure 6-32. Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

  • Page 100: Figure 6-32 Attach Device

    S3C2450/ Mobile Solution/ IM-1.0-06-01 Figure 6-32 Attach Device Property of Samsung Electronics Co., Ltd. Mobile Solution Group, System LSI. Public...

  • Page 101: Figure 6-33 Platform Builder Window After Usb Serial Kitl Connected

    11. USB Serial KITL gets connected. Windows CE 5.0 boots on the target board and platform builder window appears as shown below in figure 6-33. Figure 6-33 Platform Builder Window after USB Serial KITL connected Mobile Solution Group, System LSI Property of Samsung Electronics Co., Ltd. Public...

Table of Contents