Samsung S5PC110 Manual page 503

S5PC110_UM
3.4.1.3 Decode Protection 0-2 Set Registers
• TZPCDECPROTxSet(TZPC0), W, Address = 0xF150_0804, 0xF150_0810, 0xF150_081C
• TZPCDECPROTxSet(TZPC1), W, Address = 0xFAD0_0804, 0xFAD0_0810, 0xFAD0_081C
• TZPCDECPROTxSet(TZPC2), W, Address = 0xE060_0804, 0xE060_0810, 0xE060_081C
• TZPCDECPROTxSet(TZPC3), W, Address = 0xE1C0_0804, 0xE1C0_0810, 0xE1C0_081C
TXPCDECPROTxSet
Reserved
DECPROTxSet
3.4.1.4 Decode Protection 0-2 Clear Registers
• TZPCDECPROTxClr(TZPC0), W, Address = 0xF150_0808, 0xF150_081C, 0xF150_0820
• TZPCDECPROTxClr(TZPC1), W, Address = 0xFAD0_0808, 0xFAD0_081C, 0xFAD0_0820
• TZPCDECPROTxClr(TZPC2), W, Address = 0xE060_0808, 0xE060_081C, 0xE060_0820
• TZPCDECPROTxClr(TZPC3), W, Address = 0xE1C0_0808, 0xE1C0_081C, 0xE1C0_0820
TXPCDECPROTxClr
Reserved
DECPROTxClr
Bit
[31:8] Write as zero.
[7:0] Sets the corresponding decode protection output:
0 = No effect
1 = Set decode region to non-secure
There is one bit of the register for each protection output,
eight outputs are implemented as standard.
Bit
[31:8]
[7:0] Clears the corresponding decode protection output:
0 = No effect
1 = Set decode region to secure
There is one bit of the register for each protection output,
eight outputs are implemented as standard.
3 ACCESS CONTROLLER (TZPC)
Description
Description
Write as zero.
Initial State
-
-
Initial State
3-10