Samsung S5PC110 Manual page 59

S5PC110_UM
2.1.5.4 Pad Type Description
Cell Name
PBIDIRSE_G
PBIDIRF_G
PBIDIR_MDDR
PVHTBR_33_5T
PANALOGS
PANALOGSW
POSCP
POSCPB
POSC1A
PV_EFUSE
Wide-range I/O supply, programmable bi-direction I/O with cmos / schmitt
trigger input, input disable, pull-up/down and 4-step strength output
Wide-range I/O supply, programmable bi-direction Fast I/O with cmos /
schmitt trigger input, input disable, pull-up/down and 4-step strength output
Wide-range I/O supply, programmable bi-direction I/O with cmos / schmitt
trigger input, input disable, pull-up/down and 4-step strength output
Wide-range I/O supply, 5V tolerant bi-direction path-through pad with 3
different paths which have no resistor, 50ohm or 200ohm resistor
Analog input (Note: This cell does not support fail-safe operation)
Analog input (Note: This cell does not support fail-safe operation)
Pin port wide type
Wide-range I/O supply, programmable and retention oscillator for
32kHz~50MHz frequency
Wide-range I/O supply, programmable and retention oscillator for
32kHz~50MHz frequency with 3.3V clock output
Wide-range I/O supply, 32kHz oscillator for RTC interface.
Wide-range I/O supply, bi-direction path-through pad with 2 different paths
which have no resistor, 10ohm for EFUSE memory.
2 GENERAL PURPOSE INPUT/ OUTPUT
Function Description
2-24