Display Gvrp Status - H3C MSR Series Command Reference Manual

Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-list: Displays the GVRP statistics of one or multiple Ethernet ports. You can
specify up to 10 Ethernet port lists, by each of which you can specify an individual port in the form of
interface-type interface-number, or a port range in the form of interface-type interface-number1 to
interface-type interface-number2, where the end-port number specified by interface-number2 must
be greater than the start-port number specified by interface-number1.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display GVRP statistics for trunk port Ethernet 1/1.
<Sysname> display gvrp statistics interface ethernet 1/1
GVRP statistics on port Ethernet1/1
Table 27 Command output
Field
GVRP Status
GVRP Running
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type

display gvrp status

Use display gvrp status to display the global GVRP state.
Syntax
display gvrp status [ | { begin | exclude | include } regular-expression ]
Views
Any view
GVRP Status
GVRP Running
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
: Enabled
: YES
: 0
: 0000-0000-0000
: Normal
Description
Indicates whether GVRP is enabled or disabled.
Indicates whether GVRP is running.
Indicates the number of GVRP registration failures.
Indicates the source MAC address in the last GVRP PDU.
Indicates the GVRP registration mode (fixed, forbidden, or
normal) on the port.
119