Display Gvrp Status; Gvrp - H3C s3600 series Command Manual

display gvrp status

Syntax
display gvrp status
View
Any view
Parameters
None
Description
Use the display gvrp status command to display the global GVRP status (enabled or disabled).
Examples
# Display the global GVRP status.
<Sysname> display gvrp status
GVRP is enabled
The above information indicates that GVRP is enabled globally.

gvrp

Syntax
gvrp
undo gvrp
View
System view, Ethernet port view
Parameters
None
Description
Use the gvrp command to enable GVRP globally (in system view) or for a port (in Ethernet port view).
Use the undo gvrp command to disable GVRP globally (in system view) or on a port (in Ethernet port
view).
By default, GVRP is disabled both globally and on ports.
Note that:
To enable GVRP for a port, you need to enable GVRP globally first. GVRP does not take effect
automatically on ports upon being enabled globally.
You can enable/disable GVRP only on trunk ports.
After you enable GVRP on a trunk port, you cannot change the port to other types.
Related commands: display gvrp status.
1-7