Display Posa Status App - H3C MSR Series Manual

Field
Notified
Related commands
reset posa statistics

display posa status app

Use display posa status app to view POS application state information.
Syntax
display posa status app [ app-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
app-id: Specifies a POS application template by its ID, in the range of 1 to 31. If no application template
is specified, the command displays state statistics for all POS application templates.
Examples
# Display state information for all POS application templates.
<Sysname> display posa status app
AppID Type
1 TCP
2 TCP
3 Flow
9 TCP
11 TCP
30 TCP
31 Flow
Table 4 Command output
Field
AppID
Type
Mode
Description
Number of notification packets sent to the POS terminal when application mapping
failures or forward failures occur.
Mode Interface
Temporary -
Temporary -
- Asy1/0
Normal -
Normal -
Temporary -
- -
Description
ID of the POS application template.
Connection mode of the POS application template: flow or TCP.
TCP connection mode of the POS application template:
•
Normal—Permanent TCP connection mode.
•
Temporary—Temporary TCP connection mode.
For the flow mode, this field displays a hyphen (-).
IPAddr:Port
192.168.7.254:1000
192.168.7.224:1000
-
192.168.4.1:20
192.4.5.5:111
192.168.7.52:4000
-
6
State
linked
Error
Down
Unlinked
Unlinked
Multilink(10)
-