Gvrp Configuration Commands; Display Gvrp Statistics; Display Gvrp Status - H3C s3100 series Command Manual

GVRP Configuration Commands

display gvrp statistics

Syntax
display gvrp statistics [ interface interface-list ]
View
Any view
Parameters
interface interface-list: Specifies an Ethernet port list. By providing a value for this argument, you can
display the GVRP statistics on the specified ports. You need to provide the interface-list argument in the
format of { interface-type interface-number [ to interface-type interface-number ] } &<1-10>, where the
interface-type argument represents the port type, the interface-number argument represents the port
number, and & <1-10> means that you can provide up to 10 port indexes/port index ranges for this
argument.
Note that, this command displays GVRP statistics only on the trunk ports included in the list. Statistics
on non-trunk ports will not be displayed.
Description
Use the display gvrp statistics command to display the GVRP statistics of trunk ports.
This command displays the following information:
GVRP status
Number of the GVRP entries that fail to be registered
Source MAC address of the previous GVRP PDU
GVRP registration type of a port
Examples
# Display the GVRP statistics of Ethernet1/0/1, assuming that the port is a trunk port.
<Sysname> display gvrp statistics interface Ethernet 1/0/1
GVRP statistics on port Ethernet1/0/1

display gvrp status

Syntax
display gvrp status
View
Any view
GVRP Status
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
: Enabled
: 0
: 0000-0000-0000
: Normal
1-6