Display Irf Topology - H3C MSR Series Command Reference Manual

Field
Status

display irf topology

Use display irf topology to display IRF fabric topology information, including the member IDs, IRF
port state, adjacencies of IRF ports, and CPU MAC address of the master.
Syntax
display irf topology
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the IRF fabric topology.
<Sysname> display irf topology
-------------------------------------------------------------------------
MemberID
2
1
Table 5 Command output
Field
IRF-Port1
IRF-Port2
MemberID
Link
neighbor
Description
Link state of the IRF physical interface:
•
UP—The link is up.
•
DOWN—The link is down.
•
ADM—The interface has been manually shut down by using the
shutdown command.
•
ABSENT—Interface module or expansion interface card that hosts
the interface is not present.
Topology Info
IRF-Port1
Link neighbor
DIS ---
UP 2
Description
Information about IRF-port 1, including its link state and neighbor.
Information about IRF-port 2, including its link state and neighbor.
IRF member ID.
Link state of the IRF port:
•
UP—The IRF link is up.
•
DOWN—The IRF link is down because the port does not have a
reachable physical link or has not been activated by the
irf-port-configuration active command.
•
DIS—No physical interfaces have been bound to the IRF port.
•
TIMEOUT—IRF hello interval has timed out.
IRF member ID of the device connected to the IRF port.
This field displays three hyphens (---) if no device is connected to the port.
IRF-Port2
Link neighbor
UP 1
DIS ---
8
Belong To
000f-cbb8-1a82
000f-cbb8-1a82