Display Irf Topology - H3C MSR 810 Command Reference Manual

display irf topology

Use
display irf topology
Syntax
display irf topology
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the IRF fabric topology.
<Sysname> display irf topology
-------------------------------------------------------------------------
MemberID
1
2
Table 4 Command output
Field
IRF-Port1
IRF-Port2
MemberID
Link
neighbor
Belong To
Related commands
display irf
display irf configuration
to display IRF fabric topology information.
Topology Info
IRF-Port1
Link neighbor
DOWN ---
UP 1
Description
Information about IRF-port 1, including its link state and neighbor.
Information about IRF-port 2, including its link state and neighbor.
IRF member ID.
Link state of the IRF port:
•
UP—The IRF link is up.
•
DOWN—The IRF link is down because the port has no physical link or
has not been activated by the
active
•
DIS—No physical interfaces have been bound to the IRF port.
•
TIMEOUT—IRF hello interval has timed out.
•
ISOLATE—The device is isolated from the IRF fabric. This issue might
be caused by the following reasons:


IRF member ID of the device connected to the IRF port.
This field displays three hyphens (---) if no device is connected to the port.
IRF fabric that has the device, represented by the CPU MAC address of the
master in the IRF fabric.
IRF-Port2
Link
UP
DIS
command.
The IRF fabric does not support the device model.
The maximum number of member devices has exceeded the upper
limit.
7
neighbor Belong To
2 000f-cbb8-1a82
--- 000f-cbb8-1a82
irf-port-configuration